AR-15 3.5lb Enhanced Reliability Reduced Power Spring Kit + Combined Adjuster (5.56 223 308) Kit 3
AR-15 Enhanced Reliability Reduced Power Spring Kit Trigger/Hammer
*PLUS Combined Grip Screw/Trigger Adjuster Reduce Trigger Creep*
These precision springs are calibrated to produce a consistent pull on stock rifle triggers while preserving ignition reliability with U.S.-manufactured ammunition.
The spring set can produce 3.5 to 4 lb. trigger pull when used in conjunction with some aftermarket Fire Control Group parts
It can also be used with properly prepared Mil-Spec trigger/hammer components to produce a 4 to 5 lb. pull with a smooth “roll off feel and good control.
With a little polishing to the rest of your Mil-Spec trigger components can give you fantastic results, a huge upgrade from Mil-Spec and can help to reduce light primer strikes
Will give your Precision Rifle the newly improved trigger feel it should have.
Will work for domestic as well as the use of low-sensitivity primers
** These Springs will not ignite Hard Military Ammo/primers **
Combined Grip Screw/Trigger Adjuster
A very easy way to Improve Your Trigger
A great upgrade for any Mil-Spec Fire Control Group
This replaces the Mil-Spec grip Screw to Reduce Trigger Creep, Lessens Trigger Pull, Improves Accuracy with Better Hammer Break
Used to fine tune any Mil-Spec Trigger
NOTE: The lower grip screw hole must be drilled and tapped all the way through the receiver for the trigger adjuster to work…Some newer rifles do not have the threaded portion all the way through.
You must inspect your lower first to make sure the threaded area protrudes all the way through the receiver
1 Hammer Spring
1 Trigger Spring
1 Disconnector Spring
1 Stainless Steel Internally Threaded Grip Screw
1 Stainless Steel Trigger Adjuster Set Screw
1 Stainless Steel Locking Washer
1 Power Bit Allen Head 1/4″ Drive
Michael E Kimmons (verified owner) –