Mosin Nagant Trigger Spring Kit Produces a Shorter Lighter Trigger Pull

$9.00

For Gun Make: Mosin Nagant

For Gun Model: 191/30, M38, M44, 53

Location On Gun: Trigger Parts

Specific Part: Trigger Upgrade

Material/Finish: Stainless Steel

UPC: 0792713451070

MPN: 1070

Brand: Wesbaun Consultants

131 in stock

SKU: 0792713451070 Category: Tags: , ,

Description

Mosin Nagant Trigger Spring Kit Produces a Shorter Lighter Trigger Pull

The kit is for the Mosin Nagant rifles and is used to modify/upgrade the trigger so that the pull is lighter and the travel is shorter.

Shorter and lighter trigger pull equals better accuracy.

The kit is superior to all others offered for the Mosin Nagant rifles because the spring is a new design that shortens the trigger instead of turning it into a longer heavier two stage style trigger like all other trigger return springs offered for the Mosin Nagant rifles.

The kit requires no permanent modifications to the weapon and can be removed as easily as it is installed.

To Install:

1) Remove receiver from the stock

2) Remove sear spring retaining screw

3) Insert sear spring shim

4) Insert sear spring retaining screw and tighten

5) Push trigger retaining pin out until flush with the inside of the trigger

6) Insert trigger return spring inside of trigger cavity

7) Push trigger retaining pin back in through the center of trigger return spring

8) Reassemble

The Kit Will Fit:

Mosin Nagant M91/30

Mosin Nagant M38

Mosin Nagant M44

Chinese type 53

Most other variants with the standard trigger assembly

May not function or may require extra fitting with the Pro Mag Archangel AA9130 aftermarket stock

Mosin Nagant Shorter Lighter Trigger Pull Kit

The kit is for the Mosin Nagant rifles and is used to modify/upgrade the trigger so that the pull is lighter and the travel is shorter.

Shorter and lighter trigger pull equals better accuracy.

The kit is superior to all others offered for the Mosin Nagant rifles because the spring is a new design that shortens the trigger instead of turning it into a longer heavier two stage style trigger like all other trigger return springs offered for the Mosin Nagant rifles.

The kit requires no permanent modifications to the weapon and can be removed as easily as it is installed.

To Install:

1) Remove receiver from the stock

2) Remove sear spring retaining screw

3) Insert sear spring shim

4) Insert sear spring retaining screw and tighten

5) Push trigger retaining pin out until flush with the inside of the trigger

6) Insert trigger return spring inside of trigger cavity

7) Push trigger retaining pin back in through the center of trigger return spring

8) Reassemble

The Kit Will Fit:

Mosin Nagant M91/30

Mosin Nagant M38

Mosin Nagant M44

Chinese type 53

Most other variants with the standard trigger assembly

May not function or may require extra fitting with the Pro Mag Archangel AA9130 aftermarket stock

Use these helpful installation videos:

Overview:

Installation:

Function Check:

This is intended as a do-it-yourself project and detailed instructions as above will be included. However, if you are not confident in your ability to perform this task safely and without altering the weapon to such a state that it would be unsafe to use it is recommended you seek the assistance of a qualified gunsmith.

Includes

1 Trigger Return Spring

1 Sear Spring Shim

Additional information

Weight 2 oz
Dimensions 9 × 6 × 1 in

Reviews

There are no reviews yet.

Be the first to review “Mosin Nagant Trigger Spring Kit Produces a Shorter Lighter Trigger Pull”

Your email address will not be published.